Cisco Firepower Management Center License

Cisco Firepower Management Center License
Cisco Firepower Management Center License

 

 

Cisco Firepower Management Center License (FMC License) 

 

Cisco Firepower Management Center allows you to assign licenses to managed devices and manage licenses for the system. 

A single Firepower Management Center can manage both devices that require Classic licenses and devices that require Smart Licenses. 

 

 

Hardware FMC 

A hardware Firepower Management Center does not require purchase of additional licenses or service subscriptions in order to manage devices. 

 

 

Virtual FMC 

Firepower Management Center Virtual has additional licensing requirements. See Firepower Management Center Virtual Licenses. 

 

 

Cisco FMC Evaluation License 

 

Not all functionality is available with an evaluation license, functionality under an evaluation license may be partial, and transition from evaluation licensing to standard licensing may not be seamless. 

 

 

Cisco FMC Smart vs. Classic Licenses 

 

For managed devices, the licenses you need (Smart or Classic) depend on the software that runs on the device. FMC hardware models themselves require no license. Cisco Firepower Threat Defense and Firepower Threat Defense Virtual needs smart licenses for registration while NGIPS software such as Firepower 7000/8000 seriesASA Firepower and NGIPSv requires classic licenses to be activated.  

 

The Firepower Management Center requires following Smart Licenses to manage Firepower Threat Defense devices:  

 

FMC base licenses which needs NO subscription and allows user and application control, Switching and routing and NAT. FMC threat licenses enables intrusion detection and prevention, file control and security Intelligence filtering. FMC malware licenses enables AMP for Networks (network-based Advanced Malware Protection), Cisco Threat Grid and file storage. Cisco FMC URL Filtering provides category and reputation-based URL filtering.  

 

 

Moreover, by activating Cisco PLR (Permanent License Reservation) on the Cisco FMC, all features would be activated and FMC would be able to activate and support up to 25 Cisco FTD firewalls on the network.  

 

 

Cisco FMC PLR License Activation 

 

For activating this feature please follow the below steps:  

 

  • Enter the following command in the FMC CLI to access device Shell:  

Cisco FMC License

  • Enter the following commands to run Cisco PLR activation script: 

Cisco Firepower Management Center PLR License

  • By selecting 2nd option you can enable PLR feature on the device then enter 1 to verify it.  

Cisco FMC PLR License

  • After this, exit the shell and access to your FMC management IP through your browser.  
  • Select the Universal Licensing under the gear icon.  

Cisco Firepower Management Center License

At the end and in the following windows, by generating the reservation code and sending it to a Cisco partner you can receive a PLR license which can activate all instances PERMANENTLY and without any connection to the Internet!  

Cisco Firepower Management Center License

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post